Alkyd Spray Paint

How to operate:

1. There should be no dirt, grease, water wax, etc. on the surface of the object being sprayed, and nearby objects should be protected.

2. Before spraying, the can must be vibrated for about 30-60 seconds until the paint is evenly mixed.

3. Press the nozzle to spray evenly at a distance of about 20 cm from the surface of the object to be sprayed to prevent backward spraying.

4. Using multiple spraying method, spray a thin layer every about 3 minutes, the effect is better than one-time completion.

5. Before storing after use, the can body must be turned upside down and the nozzle is pressed for about 3 seconds to clean the remaining paint of the nozzle to prevent clogging.

Precautions:

1. This product is packaged under pressure and is prone to explosion when exposed to high temperatures. Pay attention to ventilation in the working environment and try to avoid contact between the material and skin when using it;

2. It needs to be stored in a ventilated, dark, cool and dry place;

3. It is recommended to store 0-30℃; out of direct sunlight. Lower temperatures cause increased viscosity of a temporary nature.

4. Please keep it out of reach of children and spray out the adhesive before discarding;

5. If the adhesive comes into contact with your skin or eyes, please wash it with clean water. In severe cases, please seek medical attention immediately.

6. This product is flammable, do not put it in the car, keep away from heat sources and open flames, and it is strictly forbidden to expose, puncture or burn the jar.

7. Avoid using in low temperature or humid environment (RH≥80%), so as not to affect the effect.

8. Test spraying on a small area of the sample board before use, and then construct after confirming the effect.

9. When spraying, keep the can upright and the angle with the horizontal plane should not be less than 45° to prevent insufficient air pressure after spraying.