Hvac Spray Adhesive

HVAC spay adhesives are widely used for a variety of thermal insulation materials like rubber, PE board, phenolic foam board, etc. They can also be used to bond thermal insulation materials with metal, wooden substrate board.

Directions:

1. Keep the surface clean and operate it under conditions that are dry and free of oil, dust and water;

2. Please shake well before use to achieve the desired effect;

3. Spray adhesive evenly from 20-30cm away from the bonding surface;

4. Wait for 30-60 seconds and touch the surface of the adhesive with your hands, If the adhesive is not sticky, it means it is completely dry and can be pasted;

5. After use, invert the spray can and spray downward for about 2-3 seconds to remove residual glue from the nozzle and avoid clogging of the nozzle.

Precautions:

1. This product is packaged under pressure and is prone to explosion when exposed to high temperatures. Pay attention to ventilation in the working environment and try to avoid contact between the material and skin when using it;

2. It needs to be stored in a ventilated, dark, cool and dry place;

3. It is recommended to store 0-30℃; out of direct sunlight. Lower temperatures cause increased viscosity of a temporary nature.

4. Please keep it out of reach of children and spray out the adhesive before discarding;

5. If the adhesive comes into contact with your skin or eyes, please wash it with clean water. In severe cases, please seek medical attention immediately.

6. This product is flammable, do not put it in the car, keep away from heat sources and open flames, and it is strictly forbidden to expose, puncture or burn the jar.